Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories

$4.00
Universal shoulder strap for ORTLIEB bags. Includes D-rings, plastic shoulder pad and carabiners. For Bike-Packer and Sport-Packer models from 2009 and for all Back-Roller City, Sport-Roller City and Gravel-Pack models.
DETAILS:
- 1 shoulder strap with carabiners

$5.99
Compatible with Shiner and Shiner Back lights
- Rubber pad with loop straps to quickly mount and remove light for recharging
- 50mm bolt spacing to fit most rear racks

$6.99
Banjo Brothers' Phone Wallet is ingeniously simple and effective. This durable, water-resistant pouch weighs next to nothing yet it keeps your phone, ID, and spare key protected. It features a full-length zipper and a headphone slot, too.

$9.00
This mounting set allows you to attach your Saddle-Bags to other bicycles.
For all Saddle-Bag, MudRacer and Micro models.
- 1 mounting set for Saddle-Bags, including screws

$9.95
The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.

$9.99
Replacement waterproof liners for Banjo Brothers bags.
To get correct replacement liner, measure across the top edge of liner from one welded seam to the opposite seam (do not measure to cut edges of liner). Medium liner is 11" wide and Large is 12" wide.
- Works only with models 01150, 01150R and 01150W
- Welded seams
- Not suitable as a stand-alone bag

$9.99
- Stretch web secures those hard-to-hold items
- Great for any rack
- 4 easy-to-handle molded hooks attach anywhere
- Dimensions 11" x 11"

$9.99
The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations.
- Can be installed and removed by hand or with allen key
- Includes necessary 0.5 mm washers and 4 mm spacers
- Sold in packages of two

$10.00
The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else.
- For general tie down use
- 42" loop strap, plus 8" closure buckle strap

$10.99
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost.
CONSTRUCTION
• Aluminum

$10.99
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost.
CONSTRUCTION
• Aluminum

$10.99
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost.
CONSTRUCTION
• Aluminum

$11.00
Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points.
- Stainless Steel Coated Clamp
- Sold as a Pair

$11.99
The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.

$12.99
Replacement Surly Bicycle Mounted Rack Parts
- Direct replacement item for Surly racks
- Replacement upper tubes, made from Stainless steel

$14.99
- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only)
- Compatible with luggage carriers from 80 up to 150 mm
- -01: carrier plate for rear racks that are not MIK ready.
- -02: adapter plate for bicycle rear bags that are not MIK ready
- Suitable for e-bikes
- Max load: 26lbs/12kg

$15.00
The integrable mesh inner pocket with zipper for the Handlebar-Pack QR. For all small items, such as wallet, snacks, cell phone or keys.

$15.00
- Strap with buckle and hook for supporting the Seat-Packs
- Prevents lowering of pack with uneven weight distribution
- Additional support for Seat-Pack straps when fully loaded
- Excessive strap is fixed with Velcro
- Can be used for Seat-Pack M and L

$15.00
The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level.
- 32mm diameter clamping area for lights
- Attaches with two M5 bolts and a steel backing plate
- Mounts on left or right side

$16.95
The Gel Fuel Rack / NDM 1 give the user the ability to reach their gels and similar snacks at any time while our on the trails. The "grab-n-pull" aspect of the rack makes it super fast for you to fuel up with new energy. The accessory is compatible with backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. This attachment is compatible with the following products:
- Raw
- MTB Hydro
- Airborne
- Ranger
- Patriot
- Vertical
- Outlander (NOT Compatible with Outlander PRO)
With the Gel Fuel Rack / NDM 1 you'll always have instant access to your gels or other small snacks. The "grab-n-pull" make it super fast to fuel up with new energy. The accessory can be attached to the harness of all backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. The accessory is simply attached to the Velcro shoulder strap. This attachment is compatible with the following products:
Page 1 of 2
Next page