Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Grips

$90.00
In the Brooks tradition, these grips are made of natural leather, the same long-wearing leather used for Brooks saddle tops. Each grip is made with a stack of leather washers. These washers are held together by 3 spokes, enabling the grip to be adjusted to the desired length. The standard length of each grip is 130mm, but each grip can be shortened to the desired length independently. The grips are delivered in a box containing shorter 80mm spokes to make them even shorter. - Inner Diameter: 22.2 mm - Weight: 290g per Pair
$89.95
The BioKork version with a full size, multi-position bar end for maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling. Perfect for commuting, touring, or for those who like a longer bar end. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP5 BioKork eliminates numb hands, aching fingers, and tired forearms. The grip body is made up of 40% cork, which is sustainably grown in Portugal and able to meet strict ecological guidelines. The central core uses 20% less plastic and is reinforced with natural fibers. All components of the grip are produced with regards to sustainability. - Cannot be used on carbon handlebars - Bar end material: fiberglass composite with rubber inserts - Uses: touring, commuting
$79.95
The Ergon grip with a full size, multi-position bar end for maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling. Perfect for commuting, touring, or for those who like a longer bar end. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP5 eliminates numb hands, aching fingers, and tired forearms. The GP5 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Not suitable for use with carbon handlebars - Uses: touring, commuting - Clamp: fiberglass composite with rubber inserts
$69.95
The BioKork version of the GP3 with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 BioKork eliminates numb hands, aching fingers, and tired forearms. The grip body is made up of 40% cork, which is sustainably grown in Portugal and able to meet strict ecological guidelines. The central core uses 20% less plastic and is reinforced with natural fibers. All components of the grip are produced with regards to sustainability. - Carbon bar compatible - Bar end material: fiberglass composite with rubber inserts - Uses: mountain biking, touring, commuting
$69.95
The GP grip with a full-size comfort bar end delivers maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling when touring or on fitness bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP4 eliminates numb hands, aching fingers, and tired forearms. The GP4 is made from 100% German, TÜV-certified rubber compounds of the purest quality. (Cannot be used on carbon handlebars)
$64.95
The GS3 combines comfort in a lightweight package, ideal for long distance endurance athletes. The three-finger bar end is made out of fiberglass reinforced composite, which offers more hand positions for increased comfort and leverage on long mountain bike rides. Additional rubber is used on the bar end, improving the rider's grip during hand position changes. The exclusive German-produced rubber compound found in the grip and on the bar end enables precise steering and control, all the while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride-tuned flex. - Carbon bar compatible - Bar end: fiberglass composite with rubber inserts
$60.00
Perfectly matching Brooks Cambium Saddles, Brooks Ergonomic Grips are durable and weatherproof rubber handlebar grips with a pleasant touch and feel, shaped for more comfort and variable hand positions. Sporting details to perfectly match with our Cambium Saddles, Brooks Ergonomic Grips are durable and weatherproof rubber handlebar grips with a pleasant touch and feel. Nylon fabric and vertical grooves on the underside provide increased comfort and variable hand positions. The aluminium clamp allows the grip to be adjusted for a perfect fit, with the iconic Brooks rivet at the bar end added for an elegant finishing touch. FEATURES: - Ergonomic shape - Varying sectional rubber density - Hard-wearing materials and details - Perfect match to the Cambium saddles - Thermoplastic rubber vulcanised with UV + Abrasion-Resistant Waterproof Nylon on the top and ergonomic grooves on the underside
$59.95
The Ergon grip with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 eliminates numb hands, aching fingers, and tired forearms. The GP3 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Clamp: fiberglass composite with rubber inserts - Uses: touring, commuting
$54.95
The GS-grip combined with a compact 2-finger bar end made out of fiberglass reinforced composite, which offers more hand positions for increased comfort on long mountain bike rides. Additional rubber is used on the bar end improving the rider's grip during hand position changes. The exclusive German-produced rubber compound found in the grip and on the bar end enables precise steering and control, all while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride-tuned flex. - Carbon bar compatible - Uses: mountain bike, marathon, XC
$50.00
Our best rubber grips for straight bars, thermoplastic rubber is fused with organic cotton for a natural look and feel. Suitable for city, MTB and touring use and adjustable for specific performance. Our best rubber grips for straight bars, thermoplastic rubber is fused with nylon textile for a nice look and comfortable feel, substituting organic cotton in the natural colour version. With aluminium clamp and branded rubber end plug, and adjustable for specific performance, these grips are suitable for city, MTB, and touring use. The dual textures embossed into the rubber mean the rider can turn the grip and adjust it to their preferred option. IDEAL FOR: - Commuting in the city - Travelling the globe - Urban cycling
$49.95
Combining ergonomics, function, and sustainability, the GP1 BioKork has been a top-rated grip and a consumer favorite. The grip is made from 40% cork, sourced from sustainable forests in Portugal. This green, sustainable theme is echoed throughout the complete construction of the grip with an inner core made of a reinforced plastic utilizing natural fibers which makes up 20% of its mass. - Carbon bar compatible - Clamp: cold forged aluminium – 100% recyclable - Uses: mountain bike, touring, commuting
$49.95
The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: fiberglass composite with rubber inserts
$39.95 - $44.95
Ergon GD1 Evo slim grips. - Shape: Round - Length: 144mm - Lock On: Yes - Grip Shift Specific: No - Weight: 120g - Flange: No
$39.95 - $44.95
Ergon GD1 Evo slim factory grips. - Shape: Round - Length: 144mm - Lock On: Yes - Grip Shift Specific: No - Weight: 120g - Flange: No
$39.95 - $44.95
The Ergon GE1 Evo Factory is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.
$34.95 - $44.95
The new GFR1 has a slim overall shape for maximum feedback, yet still provides an extremely high level of damping through the ribbed section under the palm. The lower gripping zone is aggressive to keep gripping forces at a minimum when lifting the front wheel. - Shape: Round - Lock On: Yes - Grip Shift Specific: No - Flange: No
$34.95 - $44.95
The Ritchey Classic Locking grip delivers excellent feel and durability with a timeless and classic aesthetic. - Dual-sided locking mechanism debossed logo - 112g/pair
$44.00
Bring the stylish comfort of a well-worn baseball glove to your ride with Portland Design Works' Bourbon Grips. They're made from classically stitched, vegetable-tanned leather with polished aluminum lockrings for durability and a finish that'll only improve with age. - Durable, high-quality full grain leather - Sturdy machined aluminum alloy lockrings - Fits 22.0-22.2mm handlebars - Weight: 136g (4.8oz) per pair - Length: 130mm (5.1") each - Lifetime PDWarranty
$40.00
Keep your bike looking good with SRAM's HydroR Lever Hoods. They're made of a soft, grippy rubber and are a great replacement hood for HydroR levers.
$39.99
Tired of numb, painful hands? The Cruise Control Drop Bar Grip System gives you the ultimate in control and comfort on your road or gravel bike. Instead of riding all day holding a round metal tube, you'll have multiple ergonomic positions designed to eliminate the high pressure zones that have you shaking your hands out every mile. Together, the Top Grip and Drop Grip offer a complete ergonomic upgrade that fits almost any drop bar on the market. So go ahead, take the long way home. Combine with the Kitchen Sink Handlebar and Really Long Bar Tape to take things to the next level. Benefits: - Ergonomic pad shaping eliminates hot spots which can lead to hand pain, numbness and tingling - Kraton rubber filters road buzz - Multiple grip options let you customize your handlebar for the perfect fit Details: - Top Grips attach to the bar underneath the tape to provide a larger, ergonomic hand position on the tops of your bars. - Drop Grips go over the end of the bar, giving you a comfortable drop position with quick access to the brake levers. Compatibility: - Compatible with standard drop bar handlebars - Top Grips are installed directly on the bar, before bar tape is applied, so you may need a fresh roll of tape. Did we mention our Really Long Bar Tape works great, especially for wider bars?
$39.95
The GC1 was developed for the ergonomic demands of cyclists riding city bikes, beach cruisers, or touring bikes with upright, rearward-swept handlebars. Using traditional round grips on these specific, laid-back handlebars causes an uncomfortable bend in the wrist. The GC1 corrects the wrist position through its anatomic and ergonomically correct form, delivering exceptional comfort. The GC1 is made from 100% German, TÜV-certified rubber compounds of the purest quality. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed.
$39.95
The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: 100% recyclable aluminum
$38.45
- 4 compounds: medium, soft, super comfort (extra-soft) or Kevlar version with suspended Kevlar particles for the ultimate tacky yet durable grip - Machined 6082 aluminum collars lock tightly with integrated grip core - 30mm outer diameter knurled grip
$37.95
PadLoc grips use a tapered inner-grip cylinder that interfaces directly with PadLoc-ready handlebars to eliminate rotational slippage entirely. The outside of the grip has a rubberized, forgiving wedge shape that improves comfort and greatly reduces ulnar nerve pressure. You must use PadLoc-ready handlebars, or modify your current handlebars by using the Park Tool saw guide (SGI-7). - 30mm diameter - Length: 102mm - Weight 102g
$37.45
- CNC aluminum locking collars - Different levels of grips for different uses - Grip Length: 130mm - Handlebar Diameter: 22.2mm - Outer Diameter: 30.5mm
$33.99 - $37.00
Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance. They fit RED 22, Force 22 and RED 10-speed ErgoDynamic shifters.
$35.00
Our initial partnership with Aaron Gwin produced numerous innovations that pushed grip technology to new levels. With the new AG2 Grips, we wanted to take things even further. We started with an ultra-soft pro compound and built it into an improved knurl pattern that provides extra tackiness and control along with reduced vibration transfer. We coupled this with our exclusive offset design that offers even more impact dampening where it is needed most, without increasing the grip diameter. We then redesigned the most impact-prone portions of the grips to provide an even better feel and accurate control when riding. - Grips feature a larger diameter than the original grips (30.5mm) with offset padding towards the rider for improved comfort - Soft Pro compound provides excellent shock absorption - Redesigned surface pattern for improved traction and vibration dampening - Redesigned ends provide an improved feel - Provide extra durability against grip blowout - Thin ribs add control without a bulky feel - Uses our race-proven Version 2.1 Lock-On system - Molded over the aluminum endcap, the end provides durability but will not gouge
$34.95
More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!
$34.95
More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!
$34.95
Ergon GD1 Evo grips. - Shape: Round - Length: 144mm - Lock On: Yes - Grip Shift Specific: No - Weight: 120g - Flange: No
$34.95
The Ergon GE1 Evo is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday. - Length: 135mm - Lock On: Yes - Weight: 105g
$34.95
The GS1 Evo reimagines what ergonomic comfort can be for touring, trail and E-Bikes by minimizing aching hands and numb fingers. Ergon took the best-selling GP1 winged grip and evolved it with popular characteristics of the mountain specific GA3. The GS1 Evo features a larger supportive wing than the GA3 and a sleeker profile than the GP1, a specific textured grip zone for the thumb, fingers and palm and a softer overall touch. Always prioritizing materials, the GS1 Evo is composed a proprietary rubber compound Made in Germany. From quick jaunts across town to endurance events to journeys across continents, the GS1 Evo is a new favorite among many riders! - Ergonomic performance comfort grip - Reduces hand and wrist discomforts - Made in Germany
$34.95
Ergonomic grips with this unique cam profile lets you choose the position that best supports your hand position and style of riding. The 11.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands. - 40mm installed diameter - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - Ergonomic shape makes for a reduced circumference compared to non-faceted grips, providing padding and comfort only where you need it - Facets create four edges on grips, which makes for additional points of contact for your hands and added grip Includes bar end plugs
$34.95
Mega Fat Paw grips were developed for riders who crave large-diameter grips that also have a soft feel. The 11.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands. - 40mm installed diameter–handlebar diameter included - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - Includes bar end plugs
$34.25
- Designed with help from Tinker Juarez - Large diameter grip at 34.5mm - Offset grip design provides more padding on the palm side of the grip - Soft TPE end offer improved comfort and grip protection - Made from ODI exclusive A.I.R.E compound for reduced weight and improved vibration dampening - Contoured surface for improved comfort on longer rides - Ergonomic finger cutouts provide improved grip in all condition - Version 2.1 Lock-On system ensure 100% slip-free performance
$33.99
- 30.3Mm thick durasoft polymer (Dsp) - Micro-Chevron grip pattern for superior comfort, Feel and control - Ultra lightweight at 27 grams per set - Includes plugs and double sided tape
$33.99
The MacAskill grip features a larger diameter in key areas of the grip to provide better cushioning for impacts and vibration dampening. - Designed and ridden by Danny MacAskill - Single-sided lock-on grip - 29–30mm diameter
$33.99
The Charger Evo is the most complex grip we’ve ever created. Dual patterned textures on each grip allow riders to absorb shock and feel handlebar support with every move. Lock-on ring design ensures the grip will stay in place for long lasting use. Lock-On Grips include the grips, clamps, screws, and plugs. - Length: 136mm - Weight (with plugs): 90 grams - Diameter: Medium (31mm)
$33.99
The North Shore mountains of British Columbia are home to some of the most amazing trails in the world. We are not only excited to announce the redesigned Northshore grip but also our new partnership with the North Shore Mountain Biking Association. A percentage of the proceeds from the sales of these grips are used to support the NSMBA and the trail building on the North Shore. The new Northshore grip is our thickest lock-on grip and features a series of textured shock absorbing sections to provide a comfortable and controlled ride. - Length: 130 mm - Weight (with plugs): 125 grams - Diameter: 33 mm
$33.99
Ride like a pro with the Steve Peat inspired Signature lock-on grips. Lock-on grips are designed to easily slide onto the handlebar and clamp with the rings to ensure it is secure and won’t slip during the most intense rides. Providing a sturdy ride, the patented lock-on design eliminates unwanted movement to maximize the rider’s control and comfort. Lizard Skins lock-on grips include the grips, clamps, screws, and plugs. - Length: 130 mm - Weight (with plugs): 112 grams - Diameter: 30.5 mm
$33.99
The classic upper pattern with a waffle finger hold for a better grip. - Compatible with MTB, BMX, ATV, PWC - Weight: 101 grams - Length: 135mm - Diameter: Medium (31mm)
$33.99
- Medium Diameter (32.25mm) - Length 135mm - 118g - Handlebar Diameter: 22.2mm
$22.00 - $33.00
Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.
$32.95
- Integrated grip body and locking collars for ultimate durability - 6082 T6 aluminum CNC machined collars - Diamond knurl pattern - Smooth profile end transition, for maximum comfort - Snap-fit end caps - Made in the UK
$29.95 - $32.95
Ritchey Truegrip X Locking mountain bike grips are comfortable and lighter-weight dual-density grips that lock to the handlebar.
$32.95
Ritchey WCS Python Trail Grips. The heart of these new grips is Tom’s patented Python self-tightening helical core design. With a spiral inner grip surface designed to literally constrict around the bar the instant that the grip starts to twist, the Python grips ensure no slippage in even the most gnarly conditions. Fastened into position with an integrated lock ring, the ergonomically shaped Python grips also feature tripledensity Kraton rubber that provides welcome support for your hands.
$32.95
The Tech Trail Clamp-Ons combine WTB’s Clamp-On technology with a slim, 30-millimeter profile ideal for smaller hands. The small knobs and DNA rubber gives you good grip while being easy on the hands. Dual clamps keep installation and removal simple and resist twisting and slipping too.
$32.30
- Comfort: Soft and comfy just like your favorite chair - Our newest addition to the ODI line brings a welcome facelift to our iconic Longneck Lock-On grip - Constructed of our proprietary Soft Compound TPE material and featuring our legendary Longneck Rib Pattern, these grips provide exceptional comfort for all riding conditions - The addition of the new v2.1 Single-Clamp Lock-On system makes installation a breeze and ensures that your grips stay put no matter what the conditions - We have also designed these grips to be e-bike friendly with exceptional vibration dampening with or without gloves, the new small flange to protect hands, and new soft feel end with hard plastic reinforcement to prevent grip blowout - Large outer diameter: 31.5mm
$32.00
The Descendant grip is for the performance-driven hard charger who needs maximum grip and confidence in their cockpit. Featuring a full-width contact area that extends from the inner clamp right to the end of the bar. The ridged pattern allows for a soft-to-touch feel and makes for superior grip and control. Available in solid colors, marble and gum options, these grips give you the option to match grip performance with your personal style. - Single-ring clamp for max width and comfort - Available in Black, Gray, Gum Rubber, Red, Gray/Black Marble and Red/Black Marble - Soft and durable ridged rubber grip pattern - Length: 133mm - Clamp: Single
$31.99
ESI's ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically. CR stands for Chunky, Racer’s Mix. - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
$31.99
ESI's ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically. XC stands for Extra Chunky. - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
$31.00
Chromag's Palmskin grip is designed for riders who like a softer, supple feel and may prefer not to use gloves. The ribbed pattern is compliant under the hand while managing moisture by channeling it away into the groove.
$30.99
Extra Chunky XL 6.75” are over 30% longer than standard grips! - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation Great for riders with wider bars: - Fat Bikes - Touring bikes - Track and pursuit bars - Fixed Gear - BMX - Scooter - Exercise Equipment - And so much more! * Colors may vary from screen to screen. NOTE: Our Black is a dark charcoal gray.
$30.99
Chunky XXL 8.25” are over 60% longer than standard grips! - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
$30.00
- Ergonomic design conforms to riders hand without feeling bulky, provides padding where it is needed most - Half-Waffle pattern on the front of the grip provides extra control when you are off the back of the bike - NEW SINGLE CLAMP—Version 2.1 Lock-On System for more usable grips space and improved comfort on the outside of the grip - Variable knurl pattern alternates from smooth to sharp texture to provide more traction without irritating your hands. - Reinforced End molded out of soft, but durable material to prevent grip blowout.
$30.00
- Ergonomic design conforms to riders hand without feeling bulky, provides padding where it is needed most - Half-Waffle pattern on the front of the grip provides extra control when you are off the back of the bike - NEW SINGLE CLAMP—Version 2.1 Lock-On System for more usable grips space and improved comfort on the outside of the grip - Variable knurl pattern alternates from smooth to sharp texture to provide more traction without irritating your hands. - Reinforced End molded out of soft, but durable material to prevent grip blowout.
$24.00 - $30.00
• Replacement locking handlebar grip sets for X0 and XX Grip Shift • Available in 100mm and short length 85mm shifter with interlocking Grip Shift interface and single bolt clamp. • Available in full-length 122mm grips with dual locking bolt clamps. • Available in black and silver.
$29.99
The classic Oury feel updated with lock-on from ODI. Bonus pack includes snap-caps and Lock Jaws. - Made by ODI - Snap-caps and Lock Jaws included
$29.99
Oury single sided V2 lock-on grips.
$29.99
Grippler gives you the moisture shedding, long gripping sensation you crave, with the hard wearing resilience you expect from Race Face. Our proprietary compound and diamond buff finish feels great with both gloves and bare hands - and with ramped grip profile on finger-side plus varied grip depth on palm-side, Grippler will bring you to a higher level of digitization. Available now in 10 colours, and two sizes, the Grippler surpasses industry standards for gripabilty. And now with Double Lock Ons the Grippler EVEN GRIPS ITSELF. Get a grip, with the Grippler. - Directional ramped logo underside - Proprietary compound extends over Dual Lock Ons - Vibration dampening, hard wearing, moisture shedding
Page 1 of 3 Next page